Accessories

Protective silicone paper for thermal press 40x60 cm (500 sheets) it is perfect for your daily sublimations, it helps to keep the surface of the plate clean, so that it does not affect the following prints. With the Protective silicone paper for thermal press you can keep your iron always clean,...

Acrylic photo frame corrugated mold is a tool used to give different shapes to Rectangular acrylic photo frames (thickness 0.3 cm). It consists of a wooden base to keep the mold stable, and a corrugated piece on which the hot acrylic is placed (at more than 80ºC) so that it takes the desired...

Acrylic photo frame corrugated mold is a tool used to give different shapes to Rectangular acrylic photo frames (thickness 0.3 cm). It consists of a wooden base to keep the mold stable, and a corrugated piece on which the hot acrylic is placed (at more than 80ºC) so that it takes the desired...

Acrylic photo frame corrugated mold (3 waves) is a tool used to give different shapes to Rectangular acrylic photo frames (thickness 0.3 cm). It consists of a wooden base to keep the mold stable, and a corrugated piece on which the hot acrylic is placed (at more than 80ºC) so that it takes the...

Cutting Mat Silhouette (30 x 30 cm) is a backing that has an adhesive to hold the materials in place while cutting. This adhesive is repositionable, so it allows materials to stick and peel off without damaging them. It is specially designed for use with the Silhouette Cameo 4. It has a standard...

This accessory is an aluminum bend tool used to be able to bend the aluminum bracelets. Product information Easy handling Material: Strong aluminum

With the Semi Automatic thermo adhesive tape Dispenser you can place the roll of thermal tape and apply it quickly and comfortably on any object to be sublimated. Save time and increase productivity when laying the tape. Reduce waste by avoiding cutting excessively large pieces with...

Chip for LFP desktop maintenance box Epson SureColor SC-F500, SF-F501, ST-T3100 and SC-T5100 With this chip you can continue to use the same maintenance tank without having to replace it with a new one. Before coloring the new chip, the tank must be emptied and the sponges removed. Recommends...

The Maintenance tank or deposit for Epson ET-2700,ET2711,ET-3700/ET-3750/ET-4750 inks is an essential accessory to keep the printer working properly. This piece absorbs excess ink that seeps out during the printing process and cleaning the printer. In this way, you ensure optimal operation of...

Box / case for masks . They are compact and easy to store anywhere. Very useful to take your protected mask anywhere. It is made of antibacterial plastic AG . ✓ Material : Antibacterial plastic ✓ Colors: various ✓ Measurements: 13 x 13 x 1.4 cm ✓ Valid for child and adult size masks ✓...

Comfortable mask adjuster. Easy to disinfect after each use and with 4 adjustment positions. ✓ Material : PP (polypropylene) ✓ Setting: 4 positions ✓ Measurements: 16.5 x 4 cm ✓ Thickness: 1 mm ✓ Printing: This product is not for sublimation. Direct printing can be done on the...

This sillicone cast is used for the correct sublimation of mugss with the SUB-miniS602 oven Dimensions: 150 x 150 x 120 mm Material: High quality sillicone Colour: black The entire mug, including handle, can be personalized Suitable for: Oven SUB-miniS602 Includes: A hard cover for...

Product under request: contact Sublimet to arrange the delivery date, through +34 93 486 90 25 or info@sublimet.com Maintenance box LFP desktop for Epson SureColor SC-F500, SF-F501, ST-T3100 and SC-T5100 Product information Dimensions:14,2 x 8,6 x 8,3 cm

The Tool for "Wooden canvas" to make a correct sublimation of the product. By placing it on the inner back part of the canvas, we get the sublimation done correctly. Material:Wood Measure: Only The measures of the tool correspond to the same measures of the wooden canvas. For example, if...

To personalize plastic mugs and pencils using the sublimation method, this mold is an essential accessory for the product to avoid the deformation caused by the heat of the sublimation oven. Material: plastic

The Printing Tool for Luxe zippered wallet to make a correct sublimation of the wallet product with zip closure. By placing it inside the wallet, we get the sublimation done correctly. Material: High density foam Measure: Only Dimensions: 20 cm x 9 cm Weight: 13 gr

To perform the sublimation of the customizable children's flask in different colors, this mold is an essential accessory for the product to avoid the deformation. Material: aluminium Customizable children’s flasks

To personalize 11oz plastic mugs using the sublimation method, this mold is an essential accessory for the product to avoid the deformation caused by the heat of the sublimation oven. Material: plastic Compatible with:Customizable plastic mugs

The thermal silicone mould facilitates the correct customization of shot glasses, up to 6 units.  Includes a glass case that facilitates suction. Material: Silicone Maximum capacity: 6 units Dimensions: 136x70x20 mm

Mug heater can be damaged if they are used on non-compatible cup plates. The Mug heater is an accessory that attaches to the Galaxy Mug Cuter. It is sold prepared for use with the cable that allows it to be plugged into the iron and does not require installation. Compatible with 6oz, 11 oz,...

Mug heater can be damaged if they are used on non-compatible Mug plates. The Mug heater is an accessory that attaches to the iron Galaxy Mug Pro (all versions). These plates have the accessory incorporated and can be purchased as a replacement or replacement. It is sold prepared for use with...

The protective gloves for sublimation ovens facilitate the manipulation of the articles and avoid possible burns. Material: cotton and elastane Size: unique The glove material acts like a thermal insulating and at the same time allows a good mobility of the hand.

The maintenance tank or deposit for residual ink is an essential accessory to maintain the printer in optimal conditions. This piece absorbs the ink excess that is filtred during the printing and the cleaning process of the machine. Compatibility with: Sawgrass Virtuoso SG400 Sawgrass...

The mug heaters can be damaged if they are used in non-compatible mug presses. The mug heater is an accessory that attaches to the plate SUB-VT201, SUB-VT202 and SUB-T500. These plates have incorporated the accessory and can be purchased as spare or replacement. It is sold ready for use with...

The mug heaters can be damaged if they are used in non-compatible mug presses. The heat resistance of plates conical cups is an accessory that attaches to the plate SUB-VT201 and SUB-VT202. These plates have incorporated the accessory and can be purchased as spare or replacement. Sold ready for...

The jigs to sublimate PC LG cases, are necessary to introduce the cases in the oven without these are deformed. These supports, they help to that the process of sublimation is realized correctly.  Information of the product: The professional jig to sublimate PC LG cases, mates to the...

The silicone clamp is used to correct 17oz conical cups sublimation oven using Sub-S601. Height: 18,5 cm Top diameter: 8,5 cm Low diameter: 8,5 cm Material: high quality silicone You can get to customize the whole cup Use with oven: Sub-S601 Included: A hardcover tightly closing the...

The Sublimet clamp ensures that the paper is secure in the cup and printing is performed on the product perfectly to sublimate. They can be used to customize 6oz cups. Material: silicone Close: metalic Durable and easy to use Size: 17,9 x 8,8 cm

The jigs to sublimate Polyamide high quality Google cases, are necessary to introduce the cases in the oven without these are deformed. These supports, they help to that the process of sublimation is realized correctly.  Information of the product: The professional jig to sublimate Polyamide...

The jigs to sublimate Polyamide high quality Samsung cases, are necessary to introduce the cases in the oven without these are deformed. These supports, they help to that the process of sublimation is realized correctly.  Information of the product: The professional jig to sublimate Polyamide...

The jigs to sublimate Polyamide high quality Apple's cases, are necessary to introduce the cases in the oven without these are deformed. These supports, they help to that the process of sublimation is realized correctly.  Information of the product: The professional jig to sublimate Polyamide...

Product on request: The estimated delivery of this product is between 2 and 3 weeks. For more information contact Sublimet through +34 93 486 90 25. The jigs to sublimate Polyamide Samsung cases, are necessary to introduce the cases in the oven without these are deformed. These supports, they...

Product on request: The estimated delivery of this product is between 2 and 3 weeks. For more information contact Sublimet through +34 93 486 90 25. The jigs to sublimate Polyamide Apple's cases, are necessary to introduce the cases in the oven without these are deformed. These supports, they...

The jigs to sublimate PC Samsung cases, are necessary to introduce the cases in the oven without these are deformed. These supports, they help to that the process of sublimation is realized correctly.  Information of the product: The professional jig to sublimate PC Samsung cases, mates to...

This accessory is exclusive for the oven Sub-miniS602 and is the sealing strip for replacement for tray of the oven Sub-miniS602.   Size: 190 x 140 x 20 mm Material: silicone Colour: White Suitable for: Sub-miniS602

The jigs to sublimate TPU Samsung cases, are necessary to introduce the cases in the oven without these are deformed. These supports, they help to that the process of sublimation is realized correctly.  Information of the product: The professional jig to sublimate TPU Samsung cases, mates to...

The Maintenance tank or deposit for Epson SC-F100 inks absorbs excess ink that seeps out during the printing process and cleaning the printer. In this way, you ensure optimal operation of the printer.

The 5-in-1 rack for Epson Surecolor SC-F2100 consists of 5 racks in 1 for the printer SC-F2100. The sizes of the frames are: Extra small: 17.80 x 20.30 cm Small: 24.40 x 30.5 cm Medium: 35.50 x 40.60 cm Large: 40.60 x 50.80 cm

With the on-site warranty extension for Epson SC-F2000 / SC-F2100 you can ensure maximum protection and peace of mind with your textile printer. This guarantee covers you against possible breakdowns in an effective and direct way, offering you an on-site service. This additional coverage...

Product under request: contact Sublimet to arrange the delivery date, through +34 93 486 90 25 or info@sublimet.com Auto Cutter Spare Blade LFP desktop Product information Dimensions:21,5 x 20 x 17 cm

Product under request: contact Sublimet to arrange the delivery date, through +34 93 486 90 25 or info@sublimet.com Roll Feed Spindle 24" LFP desktop paper reel allows you to print continuously, without having to cut the finished work preventing the prints from falling to the ground.. Product...

Product under request: contact Sublimet to arrange the delivery date, through +34 93 486 90 25 or info@sublimet.com The winder is a torque system developed to maintain the voltage at the printed outputs. This winding system also allows you to adjust the winding intensity. The pickup unit is...

Product under request: contact Sublimet to arrange the delivery date, through +34 93 486 90 25 or info@sublimet.com Metallic stand for printer Sawgrass VJ 628

This tool facilitates the placement of the strips of the 2D flip flops after the realization of the sublimation process. It is important that the montage is made after the printing to obtain an optim result. Material: plastic Related articles: Customizable 2D flip-flops

To carry out the sublimation of wireless computer mouse, this mold is an essential accessory for the product is not deformed. Product Information: Professional Molde to sublimate wireless mouses, engages perfectly with the covers for computer mouse. The perfect fit between the mold and the...

Product on request: The estimated delivery of this product is between 2 and 3 weeks. For more information contact Sublimet through +34 93 486 90 25. The jigs to sublimate Polyamide Motorola cases, are necessary to introduce the cases in the oven without these are deformed. These supports, they...

To carry out the sublimation wired computer mouse, this mold is an essential accessory for the product is not deformed.  Product Information: Professional Molde to sublimate wireless mouses, engages perfectly with the covers for computer mouse. The perfect fit between the mold and the case...