- -30%
Coaster/Magnet with tile and cork base
Add these complementary products to your cart
Coaster/Magnet with tile and cork base customizable using the sublimation technique.
- Decorative tile in white to sublimate. Size: 5,5 x 5,5 cm
- Cork base with rounded edges. Size: 8 x 8 cm
- Magnetic back surface. Size: 7,5 x 7,5 cm
- Printing from sublimation, achieving that the ink remains in the tile, providing great resistance to scratches and external aggressions.
- Material: Ceramics, cork and magnetized plastic.
- Thickness: 6 mm
Marking techniques
- Sublimation
- Colour
- Various
- Finish
- Glossy
- Shape
- Square
- Material
- Ceramic
- Marking techniques
- Sublimation
Instructions
The sublimation process can vary depending on the press used.
- 1.- Do the printing in mirror mode.
- 2.- It is advisable to let dry the paper for 5 minutes.
- 3.- Preheat the press to 200º.
- 4.- Place the product face down on the paper inside the press.
- 5.- Close the press around 220 seconds and make pressure on the product.
- 6.- Once this time has passed, take out the product of the press and then remove the paper.
- 7.- Leave cool the product for a few seconds.
If after following our advice you can’t do the printing correctly, please contact with us using the contact form or the telephone: +34 93 486 90 25