Shopping Cart
There are no more items in your cart
DTF Glitter Film InkOne A4 10 sheets
€4.90 Price excludes VAT
€4.90 Price includes VAT €7.00 -30%DTF Glitter Film InkOne A4 10 sheets are translucent PET (polyethylene terephthalate) films, designed to be used in DTF printing (Direct to Film). The image has a glossy finish with a glitter effect on the garment. Each sheet is on only one sideof the film, to be printed on this side. Since the transfer is done only on the printed area, no precise trimming, peeling or discarding processes are required. Once ironed on the garment, you must wait for the film to cool before removing it.
Characteristics:
- Material: PET (polyethylene terephthalate) resistant to the temperature of the thermal press
- Size: A4 (210 x 297 mm)
- Thickness: 75µ
- Finish: Glossy / matte with glitter effect
- Treatment: on one side of the film
- Printable area: the most matte side
- Easy to use: The transfer is done only on the print (no difficult trimming required)
- Use: each film is used only once
- Package: 10 films for DTF
This film is treated only on one side of the film, so it has to be printed on the treated area.
The film for DTF is the support where the printing is done with the special inks, to then apply the polyamide powder. Finally, it is placed in the drying oven to harden the adhesive powder, leaving the film ready to be printed on the garment using a heat press.
| Features | Film DTF Glitter InkOne A4 10 sheets |
|---|---|
| Finishing | Shiny / matte with glitter effect |
| Takeoff | Cold takeoff |
| Treatment | 1 sided |
| Printable area | Printable on the matte side. If in doubt, to identify the printable side, place the sheet on a flat surface, slide your finger over the paper, pressing lightly. The side that has more texture and offers greater slip resistance is the printable one. |
| Recommendation | A second ironing of 20-30 seconds is recommended once the film has been removed for greater fixation and to improve the texture and softness of the print. |
- Brand
- InkOne
- Size
- A4
- Format
- Sheets
- Type of paper
- Film
- Paper format
- A4
- Peel
- Cold peel
140000018
New
- -50%
- -45%
- -30%
Instructions
- 1.- Preheat the iron to 150ºC-180ºC.
- 2.- Place the film on the garment and apply medium pressure for 8-10 seconds
- 3.- Once ironed, wait for it to cool and remove the film
- 4.- Once the film has been removed, iron again for 20-30 seconds for greater fixation and to improve the texture and softness of the print.
Customers who bought this product also bought:
Last items in stock
Last items in stock
- -30%
- Pack
Tap to zoom
