Mesh cap
Add these complementary products to your cart
The mesh cap customizable using the sublimation technique. They are of various colors and pleasant touch, ideal to give to the family or business promotional gifts.
- Material: 100% polyester
- Print: Front.
- Thickness: 5mm central part and 3 mm visor.
- Approximate measurements of the sublimable part: 175 x 75 mm
- Adjustable rear plastic closure allows expansion from 6.5 cm to 11.5 cm
Marking techniques
- Sublimation
- Serigraphy
- Textile Vinyl
- Transfer
- Colour
- Various
- Finish
- Cotton touch
- Material
- Polyester
- Marking techniques
- Serigraphy
Sublimation
Textile Vinyl
Transfer
Instructions
The sublimation process can vary depending on the press used.
- 1.- Do the printing in mirror mode.
- 2.- It is advisable to let dry the paper for 5 minutes.
- 3.- Preheat the press to 190º.
- 4.- Place the product in the press and put the paper above.
- 5.- Close the press for 40 seconds and make pressure on the product.
- 6.- Once this time has passed, take out the product of the press and then remove the paper.
- 7.- Leave cool the product for a few minutes.
If after following our advice you can’t do the printing correctly, please contact with us using the contact form or the telephone: +34 93 486 90 25