• Pack
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)
Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)

Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)

(5)
(0)

Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment) is a continuous printing system to create personalized transfers with the DTF technique, which will be ready to print garments of almost any type of fabric and color. For color management and white layer application, RIP software is required (included).

Both the DTF printer and the DTF inks must be located in a place where the temperature is between 18ºC and 28ºC with a humidity between 45% and 60%.

The pack contains:

  • Printer for DTF 35 cm ROL InkOne IK-902
    • Control unit: precise and easy to use
    • Circulation system: with an intermediate tank for white color
    • Agitator unit: for the color white
    • Format: Coil
  • DTF Dryer and Shaker 33 cm InkOne K-901

  • Set of 5 250 ml ink bottles
    • Black
    • Cyan
    • Yellow
    • Magenta
    • White

  • DTF hot peeling film in roll 33 cm x 50 m

  • 500 g of Polyamide powder for DTF

  • 30 single-use gloves
  • USB cable
  • 2 Dampers
  • 2 syringes, with auxiliary tube + conical plastic tip for syringe needle
  • 15 special tissues for cleaning heads
  • 10 head cleaning swabs
  • 4 data cables for head
  • Back Roll Support
  • Waste can
  • 6-channel tube for inks
  • Original rip

  • CADlink Digital Factory v11 DTF

  • DTF Fume Purifier SUB-P502
 
TECHNICAL SPECIFICATIONSDTF ROL 35 cm printer InkOne IK-902
Dimensions 800 x 330 x 215 mm
Motherboard Hoson
Required operating system Windows 7/8/10/11
Print speed 5.2linear meters / hour (1440x 720 dpi)
Print head 2 x Epson XP600
Number of heads 2
Print capacity Coil
Print width 34 cm
Warranty 12 months*
Ink consumption 20ml/m2
Colors CMYKWW WWWW
Ink technology Water-based pigment ink
Ink supply Ink tank system
White ink recirculation and agitation Yes
Compatible with automatic oven Yes
* The machine is covered by a 12-month delivery guarantee, with the exception of parts that transport ink, such as the print head, capping, wiper, damper or the system of hoses.
Brand
InkOne
Paper format
Coil 35 cm
Printers by type
DTF
141540079
New product
Start of the dayEnd of the dayWeeklyMonthlyBimonthlySemestral
Head cleaning
Injector test
Wiper cleaning
Capping cleaning
Wet the capping with mild cleaning solution
Cleaning the lower part of the head
Empty the waste ink tank
Encoder strip cleaning
Cleaning drag rollers
Shake ink tanks
White ink tank cleaning
Change of dampers
Change of capping
Change of recirculation pump tube

Reviews

Write your review

Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment)

Pack DTF ROL InkOne IK-902 Pro 35 cm (full equipment) is a continuous printing system to create personalized transfers with the DTF technique, which will be ready to print garments of almost any type of fabric and color. For color management and white layer application, RIP software is required (included).

Both the DTF printer and the DTF inks must be located in a place where the temperature is between 18ºC and 28ºC with a humidity between 45% and 60%.

The pack contains:

  • Printer for DTF 35 cm ROL InkOne IK-902
    • Control unit: precise and easy to use
    • Circulation system: with an intermediate tank for white color
    • Agitator unit: for the color white
    • Format: Coil
  • DTF Dryer and Shaker 33 cm InkOne K-901

  • Set of 5 250 ml ink bottles
    • Black
    • Cyan
    • Yellow
    • Magenta
    • White

  • DTF hot peeling film in roll 33 cm x 50 m

  • 500 g of Polyamide powder for DTF

  • 30 single-use gloves
  • USB cable
  • 2 Dampers
  • 2 syringes, with auxiliary tube + conical plastic tip for syringe needle
  • 15 special tissues for cleaning heads
  • 10 head cleaning swabs
  • 4 data cables for head
  • Back Roll Support
  • Waste can
  • 6-channel tube for inks
  • Original rip

  • CADlink Digital Factory v11 DTF

  • DTF Fume Purifier SUB-P502

Write your review

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.