Polyester film for magnets 78 x 53 mm
Polyester film for magnets 78 x 53 mm
Polyester film for magnets 78 x 53 mm
Polyester film for magnets 78 x 53 mm

Polyester film for magnets 78 x 53 mm

( 5 ) 1 Review(s)

Add these complementary products to your cart

The Polyester film for magnets 78 x 53 mm is the transparent consumable that is placed over the design to protect it when mounting the 78 x 53mm rectangular magnets or badges. They are high quality pieces to achieve a professional finish. Along with the front side and the back side selected, and using the Rectangular magnet and badge maker machine B-900S a custom magnet or badge can be mounted in seconds.

Personalized magnets are used in advertising campaigns, as souvenirs and with personalized photos. Custom badges with mounted needle are ideal for marketing campaigns, sporting or political events, or simply as decorative elements.

Also purchased separately:

  • Front side for rectangular magnets
  • Back side for rectangular magnets

Check out all spare parts

Everything you need to create your badges or magnets:

 

Fridge magnets are perfect for personal applications or for advertising campaigns.

They can be used as souvenirs for events such as weddings, baptisms and communions, or as travel souvenirs, photos of children or couples. They are also widely used in marketing campaigns, because they are always visible in the customers' fridge, they represent a permanent reminder of the brand and allow contact information to be always at hand.

Due to the ease of printing the design and its quick assembly, they can also be used as souvenirs of tourist places, even with personalized photographs.

Shape
Rectangular
Badge size
78 x 53 mm
133030029
New product

Machine Compatibility:

MachineCompatible sizesInterchangeable MoldsCutting toolBadgesMagnets
B-900s 78 x 53 mm Paper punch-cutter rectangular
B-700 Ø59 mm Mold Ø59 mm Paper cutter CM-500
Ø38 mm Mold Ø38 mm
B-500 Ø59 mm Paper cutter CM-500
Ø38 mm
B-150 Ø59 mm Paper cutter CM-500
Ø38 mm

Compatibility according to Printable Area:

Printable areaMachineCutting toolBadgesMagnets
Ø38 mm B-700 Paper cutter CM-500
B-500
B-150
Ø59 mm B-700 Paper cutter CM-500
B-500
B-150
78 x 53 mm B-900s Paper punch-cutter rectangular

Create custom magnets and badges:

  1. Printing:
    • Select the design you want to print. It can be a logo, a text, an image or a photograph, or a combination of these.
    • It is recommended to use a design program to create templates according to the size of the badge or magnet. The template can include guide lines to facilitate cutting and assembly.
    • Remember to leave a paper edge, which will bend to hold onto the back of the badge or magnet.
    • Print the design on paper, using your usual printer.
  2. Cutting:
    • To cut the paper to the correct size and shape it is recommended to use a cutter or die cutter of the size that corresponds to the badge or magnet you want to create.
    • Place the paper in the chosen cutter so that the design is exactly centered in the cutter's viewing window.
    • Depending on the cutter used, cut the paper.
    • The paper is ready to mount on the badge or magnet.
  3. Assembly:
    • Place the front piece of the badge or magnet in the mold 1 of the machine. If you are using the B-150, you must first place the supplied metal washer in the lower mold.
    • Lay the paper with the design exposed on top of the front piece.
    • Cover the paper with a piece of polyester of the corresponding size.
    • Rotate the blue base until it stops, so that mold 1 is positioned underneath the upper mold. If using the B-150 machine, place the upper mold in position 1.
    • Pull the lever until it stops. The front of the badge or magnet is now ready and will remain in the upper mold.
    • Place in the lower mold 2, the selected back part according to the type of badge or magnet that you want to mount. In the case of the B-150 machine, you must first remove the meal washer from the lower mold.
    • The side with the needle, magnet, bottle opener, etc., will be facing down inside mold 2, and will not be visible at the moment.
    • Turn the blue base until mold 2 is underneath the upper mold. In the case of the B-150 machine, you will need to place the upper mold in position 2.
    • Pull the lever as far as it will go, then return it to the normal position.
    • Rotate the base again to remove the finished product.

Reviews

Write your review

Polyester film for magnets 78 x 53 mm

The Polyester film for magnets 78 x 53 mm is the transparent consumable that is placed over the design to protect it when mounting the 78 x 53mm rectangular magnets or badges. They are high quality pieces to achieve a professional finish. Along with the front side and the back side selected, and using the Rectangular magnet and badge maker machine B-900S a custom magnet or badge can be mounted in seconds.

Personalized magnets are used in advertising campaigns, as souvenirs and with personalized photos. Custom badges with mounted needle are ideal for marketing campaigns, sporting or political events, or simply as decorative elements.

Also purchased separately:

  • Front side for rectangular magnets
  • Back side for rectangular magnets

Check out all spare parts

Everything you need to create your badges or magnets:

Write your review

Product added to wishlist
Product added to compare.