Summer Special (August 1 to 31): Customer service will be limited during this period, as well as incidents, subscriptions and telephone service | More information

Cart My cart 0 Items

Reusable hygienic face mask

0 comments 

For more information about mask certificates, please contact us at info@sublimet.com

The reusable face mask can be customized by sublimation, they are made with waterproofed fabric and comply with UNE 0065/20 regulations. It also has an antibacterial treatment with 92% filtration

Product information:

  • Washing: up to 66 washes at 35º maintaining the water-repellent and antibacterial properties.
  • Ironing: It is recommended to iron the masks after washing to reactivate their properties.
  • Compliant with UNE 0065/20:
    • Bacterial filtration efficiency (BFE) 92% - Required to be >=90
    • Breathability (PA/cm2) < 41 - Required to be of < 61
    • Both data are governed by UNE-EN14683-2019+AC2019
  • Material: Double fabric of 285gr/m2
    • Polyester 92%
    • Elastane 8%
    • UNE 0065/20 Certificate
    • OEKO-TEX 100 Certificate
  • Protection:
    • Hydrofuged fabric both sides
    • Antibacterial Treatment
    • APPLIFRESH BC.
    • Static permanent microbial agent. C6
    • Technology
  • Personalization:
    • The personalization of the masks must be done in 2 times, one for each side.
    • It is convenient to put a protective paper between the faces so as not to stain the fabric.
    • Temperature: 190º / time: 60 seconds - These parameters can vary according to printer and plate.

Measures (up to the ear)

All measurements of these textile products are approximate and may be affected by the process of image transfer and clothing.

Labels

See more details

Specifications of Reusable hygienic face mask

Additional information

  • Aerosol filtration efficiency:> 96%.
  • Efficiency of particle filtration:> 95%. Tests carried out according to UNE-EN 13274.
  • Determination of dimensional stability according to ISO 5077: 2008.
  • Guarantees protection against solid and liquid aerosols.
  • Complies with everything specified in the new UNE-0065: 2020 standard and the European CWA 17553 standard
  • Comfort - adequate.
    • Facial adjustment:> 94% (Adjustment to nose and mouth).
    • This test has been carried out according to the average morphology of the population.

Warning

These masks are not a medical device within the meaning of Directive 93/42 or Regulation EU / 2017/745, nor are they PPE within the meaning of Regulation EU / 2016/425.

As it is a protective and hygiene product, no returns are possible.

Properties

  • Breathable
  • They do not absorb liquids or odors
  • Machine washable up to 60º
  • Supports up to 30 washes
  • Do not adhere to the body
  • They do not absorb sweat
  • Prevents allergies like dust, bacteria, smoke, pollution, ash and pollen
  • It limits the transmission of infectious agents exhaled by the user to the environment and to others, they also protect the transmission through the saliva of sick people or carriers.

Customizable fabric face masks

This protective mask , also known as face mask , face mask , face mask , or mask mouth cap , limits the transmission of infectious agents exhaled by the user to the environment and to others, and also protects the transmission by the saliva of sick people or carriers. This product has become popular as a result of the health crisis caused by the COVID-19 virus (coronavirus), after which the authorities have recommended or even forced to use antivirus masks . This situation has increased the demand for coronavirus face masks with the aim of protecting both the wearer and other people who are within 2 meters.

Placement of face mask

  • 1. Wash your hands with soap and water or rub them with a hydroalcoholic solution before handling the face mask.
  • 2. Identify the top of the face mask.
  • 3. Position the face mask on the face, at the level of the nose. If a nose clip is available, adjust it to the nose.
  • 4. Hold the face mask from the outside and hold the headgear behind it or on both sides of the ears, without crossing them.
  • 5. Lower the bottom of the face mask to the chin.
  • 6. Verify that the face mask covers the chin.
  • 7. Pinch the nose clip with both hands to fit the nose (if any).
  • 8. Verify that the face mask is correctly positioned.
  • 9. Once adjusted, do not touch the face mask with your hands. If the user needs to touch the face mask, they should previously wash your hands with soap and water or rub them with a hydroalcoholic solution.

Removing the face mask

  • 1. Take off protective gloves.
  • 2. Wash your hands with soap and water or rub them with a hydroalcoholic solution.
  • 3. Remove the face mask without touching the front of the face mask.
  • 4. Wash your hands with soap and water or rub them with a hydroalcoholic solution.
  • 5. Once adjusted, do not touch the face mask with your hands. If the user needs to touch the face mask, they should previously wash their hands with soap and water or rub them with a hydroalcoholic solution.

Washing and drying the face mask

A complete washing cycle must be carried out (moisten, wash, rinse), with the usual detergent (not higher than pH 9 and without bleach), at a washing temperature of 35ºC.

Contact between a dirty mask (to be washed) and clean clothing should be avoided. The person in charge of the washing must protect himself to handle the dirty masks.

Do not use products that can degrade or damage the materials and that diminish their protective capacity (for example bleach or softener).

It should not be dried or sanitized with a microwave oven.

Both during drying and in the subsequent storage of the face mask, environments in which the face mask may become contaminated should be avoided.

Do a visual inspection after each wash. If any damage to the face mask is detected (minor fit, deformation, wear, etc.), the face mask should be discarded.

Procedure for disposing of the face mask

Face masks must be disposed of in a container provided with a plastic bag (preferably with lid and non-manual control). It is recommended to use a double bag to preserve the contents of the first bag in case of tearing of the outer bag.

Maximum continuous use duration

For comfort and hygiene reasons, it is recommended not to wear the face mask for more than 4 hours. In case it gets wet or deteriorates from use, it is recommended to replace it with another.

The face mask should be washed every time it gets dirty, moisten or cannot be positioned correctly on the face. The face mask should not be used if it is dirty or wet. In the event that it is to be temporarily stored, contact with any surface should be avoided.

It should also not be placed in a waiting position on the forehead or under the chin during and after use.

Related products

3 Review(s) 

Compare the sublimation papers Jetcol and Texprint | More info The A4 Texprint XP HR universal Paper 110 sheets allows you to transfer the image that you want with great color fidelity and excellent quality. Format: sheets Size: A4 Gramaje: 105 gr Quantity: 110 sheets Quick dry Paper...

1 Review(s) 

Compare the sublimation papers Jetcol and Texprint | More info Th sublimation paper in sheets Texprint allows to transfer the image that we want with a high colour fidelity and an excellent quality. Format: sheets Size: A3 Weight: 105 gr Quantity: 110 sheets Quick dry Paper types:...

0 Review(s) 

The sublimation paper in rolls Texprint allows to transfer the image that we want with a high colour fidelity and an excellent quality. Format: rolls Size: 111,8cm x 84m Heavyweight: 100 gr Size of the joint: 7,62 cm in diameter (3 inches) Quick dry and with adhesive Paper types:...

0 Review(s) 

The ink cartridges Sublijet-HD for sublimation are compatible with the printer Sawgrass Virtuoso SG400 and SG800. They are a perfect solution to obtain an optimal result in sublimation. Compatible printer: Sawgrass SG400 (A4) and SG800 (A3) in 29 ml cartridges (and 42 ml for black)....

1 Review(s) 

Adhesive thermal tape is resistant to high oven temperatures for sublimation. It is basically used for the correct subjection of the different products without leaving mark and without melting.Measurements: 5 mm wide x 30 m long 10 mm wide x 30 m long 20 mm wide x 33 m long

How to sublimate this product?

Instructions

The sublimation process can vary depending on the press used.

    • 1.- Do the printing in mirror mode.
    • 2.- It is advisable to let dry the paper for 5 minutes.
    • 3.- Preheat the press to 190º.
    • 4.- Place the cover in the press and put the paper above.
    • 5.- Close the press for 60 seconds and make pressure on the cover.
    • 6.- Once this time has passed, take out the cover of the press and then remove the paper.
    • 7.- Leave cool the cover for a few minutes.
Important!: Do not forget to use protective paper inside textile products so that the ink does not penetrate the other side of the fabric and also prevent the plate from staining and affecting future products.

If after following our advice you can’t do the printing correctly, please contact with us using the contact form or the telephone: +34 93 486 90 25

Comments

No customer comments for the moment.

Write a review

We use own and third-party cookies to measure the browsing habits of users and offer advertising of interest. If you continue browsing, we consider that you accept its use. You can change the settings or get more information here.
close