Square metallic Christmas ornaments (2 sides)
Square metallic Christmas ornaments (2 sides) customizable using the sublimation technique. Manufactured with an elegant metal coating with a shiny surface and a sublimation sheet on the inside. Ideal to give a Christmas and personal touch.
- Material: Metal with sublimable aluminum plate
- Finish: Glossy
- Sublimable part: 1 faces
- Product size: 8 x 6.5 cm
- Sublimable size: 5.5 cm
- Includes a red string to hang on the tree
- One face
- Marking techniques
The sublimation temperature and time may vary depending on the press, paper and inks used. Adjust the values based on the result obtained.
- 1.- Do the printing in mirror mode.
- 2.- It is advisable to let dry the paper for 5 minutes.
- 3.- Preheat the press to 180ºC.
- 4.- Place the product in the press and put the paper above.
- 5.- Close the press for 45 seconds and make pressure on the product
- 6.- Once this time has passed, take out the product of the press and then remove the paper.
- 7.- Leave cool the product for a few minutes.
If after following our advice you can’t do the printing correctly, please contact us using the contact form or the telephone: +34 93 486 90 25