SUB-VT203 6 in 1 Mug Heat Press
SUB-VT203 6 in 1 Mug Heat Press
The heat press for sublimation of personalized mugs is a machine prepared to sublimate ceramic mugs in a very simple way.
The setting of time and temperature is regulated with a timer built into the machine itself. It is easy to operate and configure. In addition, it allows you to sublimate 2 cups simultaneously. The pressure that is carried out in the 2 cups allows a correct sublimation.
Product Information:
- Temperature and time control: digital
- Time range: between 0 and 460 sec
- Maximum temperature: 225 ºc
- Pressure system: force multiplier arm.
- Printing type: sublimation
- Manufacturing process: manual
- Power: 240 volts
- Plate size: 61 x 43 x 30 cm
- Workspace: Sublimation of 2 simultaneous cups
- Easy to exchange resistors, without using tools.
It includes:
- Conical resistance 2,5 oz
- Conical resistance 12 oz
- Conical resistance 17 oz
- Cylindrical resistance 10-11 oz
- Cylindrical resistance 6-10 oz
- Cylindrical resistance 11-15 oz
- Thermal plate for mugs
- Cable
- Instructions
The resistance is a wear accessory that has to be replaced over time.
Technical specifications | 6 in 1 SUB-VT203 |
---|---|
Voltage (V) | 240 V |
Power (W) | 130 - 260 W |
Temperature (ºC) | max 225 ºC |
Shape | Capacity | Height | Pad thickness | Cable | Maximum pressure setting* | Minimum pressure setting* | ||
---|---|---|---|---|---|---|---|---|
Larger diameter** | Minor diameter** | Larger diameter** | Minor diameter** | |||||
Conical | 2,5 oz | 8 cm | 1 cm | 51 cm | Ø4 cm | Ø3 cm | Ø5,5 cm | Ø4 cm |
Conical | 12 oz | 16 cm | 1 cm | 27 cm | Ø8 cm | Ø5 cm | Ø8,5 cm | Ø5,5 cm |
Conical | 17 oz | 13 cm | 1 cm | 27 cm | Ø9,5 cm | Ø5 cm | Ø10,5 cm | Ø5,5 cm |
Cylindrical | 6-10 oz | 8,5 cm | 1 cm | 50 cm | Ø4,5 cm | Ø4,5 cm | Ø5 cm | Ø5 cm |
Cylindrical | 10-11 oz | 13 cm | 1 cm | 24 cm | Ø5 cm | Ø5 cm | Ø6 cm | Ø6 cm |
Cylindrical | 11-15 oz | 22 cm | 1 cm | 26 cm | Ø7 cm | Ø7 cm | Ø8,5 cm | Ø8,5 cm |
(*) Measurements obtained with the pressure regulators of the plate at maximum and minimum to show the sizes that each resistance admits. (**) Diameter at the top and bottom of the conical resistors. In cylindrical resistors the diameter on both sides is the same.