3D Duo cases for Samsung Galaxy S6
Add these complementary products to your cart
3D sublimation Polyamide cases for Samsung Galaxy S6 customizable using the 3d sublimation technique.
The 3D sublimation Duo cases are composed by two pieces: one semirigid piece and one flexible piece of silicone. The semirigid piece is cased in a high quality varnish, giving the printing an extra quality in relation to definition and sharpness.
- Printing through sublimation, ensuring the ink remains inside the case, providing great resistance to scratches and external aggression.s
- Suitable for total print surface, including sides, providing a 3D effect
- Impact-resistant, protecting the mobile on all sides.
- Models 100% adaptable to all telephones apertures.
- Adapts perfectly to the Samsung Galaxy S6
- It has a space provided for the card to make the payment Contactless
- Manufactured in PC and silicone
- High quality material, long-lasting and more economical
- Semi-rigid cases with a certain flexibility
- Glossy and matt finish
- Cases models
- Galaxy S6
- Case material
- Polycarbonate (PC)
- Type of case
- Semi-rigid + Flexible
- Marking techniques
The sublimation process can vary depending on the oven used.
- 1.- Do the printing in mirror mode.
- 2.- It is advisable to let dry the paper for 5 minutes.
- 3.- Preheat the oven to 140º and the mould for 20 minutes.
- 4.- Place the case in the mould.
- 5.- Put the case in the oven for 8 minutes.
- 6.- Once this time has passed, with the help of protective gloves, take out the case of the oven and then remove the paper.
- 7.- Leave cool the case for a few minutes.
If after following our advice you can’t do the printing correctly, please contact with us using the contact form or the telephone: +34 93 486 90 25