Shopping Cart
There are no more items in your cart
40 x 40 Cushion cover (Rainbow) para Sublimación
40 x 40 Cushion cover (Rainbow)
€1.79 Price excludes VAT
€2.17 Price includes VAT €3.62 -40%Add these complementary products to your cart
The 40 x 40 Cushion cover (Rainbow) for sublimation Sublimet, are made of high quality fabrics. They are made with a zipper at the bottom so they can be washed without any problem.
- Printing from sublimation, making the ink remains in the fabric, providing a high degree of resistance from washes and external stresses.
Product information
- Material: 100% Polyester.
- Shape: square.
- Printing: 1 or 2 sides.
- Measures: 40 x 40 cm.
- Filling not included.
- Suitable for washing machine.
Marking techniques
- Transfer
- DTF
- Sublimation
- Serigraphy
- Textile Vinyl
- Finish
- Glossy
- Cushions measurements
- 40 x 40 cm
- Marking techniques
- DTF
Serigraphy
Sublimation
Textile Vinyl
Transfer
042550006
How to sublimate 40 x 40 Cushion cover (Rainbow)?
Sublimation times and temperatures are for reference only and may vary depending on the press, paper, inks, or environment. It is recommended to run tests before production.
- 1.- Do the printing in mirror mode.
- 2.- It is advisable to let dry the paper for 5 minutes.
- 3.- Preheat the press to 180º.
- 4.- Place the cover in the press and put the paper above.
- 5.- Close the press for 60 seconds and make pressure on the cover.
- 6.- Once this time has passed, take out the cover of the press and then remove the paper.
- 7.- Leave cool the cover for a few minutes.
Important!: Do not forget to use protective paper inside textile products so that the ink does not penetrate the other side of the fabric and also prevent the plate from staining and affecting future products.
If after following our advice you cant do the printing correctly, please contact with us using the contact form or the telephone: +34 93 486 90 25
When I printed on the cushion cover, the image appeared on the other side.
Sublimation can penetrate the fabric and stain the other side of the cushion. It is advisable to place a spacer inside the cushion so that this does not happen. For example, cardboard or protective paper would suffice.
The print on the cushion has white dots or lines.
These small marks are produced because a speck of dust has remained on the surface between the sleeve and the paper. It is important to clean the iron and the surface of the cover well before sublimating, for example with a lint roller. The use of protective paper is also recommended.
Zippered cushion printing.
It is recommended to leave the zipper outside the plate and thus avoid that the thickness of the latter influences the printing causing defects. If you want to print with the zipper, it is advisable to use the Teflon Iron Cushion and not use very high temperatures so that the zipper does not suffer damage.
Customers who bought this product also bought:
- -20%
- Pack
- Out-of-Stock
Out-of-Stock
Tap to zoom
