Shopping Cart
There are no more items in your cart
Ceramic mug with Marble-effect para Sublimación
Ceramic mug with Marble-effect
€2.32 Price excludes VAT
€2.81 Price includes VATThe Ceramic mug with Marble-effect is prepared to be personalized using the sublimation technique. Its marble effect finish gives it an elegant look. Made with top quality materials.
- HIGH QUALITY material, resistant to scratches, scouring pads and dishwashers.
- Microwave safe.
- White mug coated with high quality varnish.
- Individual box not included.
Properties:
- Outer diameter: 81.
- Inner diameter: 74 mm.
- Height: 96 mm.
- Useful capacity: 11 oz = 325 ml.
- Total capacity: 360 ml.
- Net weight: 340 g.
- Handle: height 72 mm x width 38 mm.
- Printable area: 95 x 240 mm.
- Compatible resistance: 11 oz.
Marking techniques
- Serigraphy
- UV-DTF
- Laser
- Sublimation
- Colour
- Various
- Material
- Ceramic
- Capactity
- 11 oz (325 ml)
- Marking techniques
- Laser
Serigraphy
Sublimation
UV-DTF
240000030-1-UNICA-GRIS
New
How to sublimate Ceramic mug with Marble-effect?
Sublimation times and temperatures are for reference only and may vary depending on the press, paper, inks, or environment. It is recommended to run tests before production.
- 1.- Do the printing in mirror mode.
- 2.- It is advisable to let dry the paper for 5 minutes.
- 3.- Preheat the press to 185º.
- 4.- Place the paper correctly above the mug and fix it with heat tape. Then, put it on the press with a resistance of 11 oz.
- 5.- Close the press for 180 seconds and make pressure over the mug.
- 6.- Once this time has passed, with the help of protective gloves, take out the mug of the press and then remove the paper.
- 7.- Leave cool the mug for a few minutes.
If after following our advice you cant do the printing correctly, please contact with us using the contact form or the telephone: +34 93 486 90 25
I have made the sublimation with an image with flat colors and they come out gradients.
Spot color printing is the most difficult, and they are also sensitive to any irregularities on the surface of the mug. A possible solution would be the use of a silicone sheet, which would help to adapt to these irregularities and achieve a more uniform impression. This silicone sheet goes especially well with spoon cups, beer mugs etc...
The print on the sides has gradient colors.
First, make sure that when you fold the paper at the top, it has not left a small space that has caused the gradient. Another reason is that the resistance that is being used is already very old and should be replaced. It must be remembered that a resistance has a durability of about 600 cups. In the event that it has not been solved with either of these 2 methods, it is advisable to crop the image on the sides.
The print on the mug has white dots or lines.
These small marks are produced because a speck of dust has been left on the surface between the cup and the paper. It is important to clean the plate and the surface of the mug well before doing the sublimation.
Reviews
très belle sublimation
Fonctionne très bien pour la sublimation. Le noir rends très bien sur le gris et modèle fait avec du rose foncé sur le rose et très bien aussi .
Customers who bought this product also bought:
- -50%
- Pack
- Out-of-Stock
Out-of-Stock
Tap to zoom
