Shopping Cart
There are no more items in your cart
DTF Film A3+ 10 sheets SUB-F005 (hot peel)
€4.12 Price excludes VAT
€4.98 Price includes VAT €9.06 -45%DTF Film A3+ 10 sheets SUB-F005 (hot peel) are translucent PET (polyethylene terephthalate) films, designed to be used in DTF (Direct to Film) printing. Each sheet is treated on both sides of the film, to be printed on the side with the greatest texture. Its thickness is 80µ. Each film can be used only once. Since the transfer is done only on the printed area, no trimming or discarding is required.
Characteristics:
- Material: PET (polyethylene terephthalate)
- Size: A3+ (329 x 483 mm)
- Thickness: 80µ
- Finish: Matte / Matte
- Treatment: on both sides of the film
- Printable area: the most matte side
- Easy to use: the transfer is done only on the print (no trimming required)
- Use: each film is used only once
- Package: 10 films for DTF
- This film can be peeled off when hot, there is no need to wait until it is cold
The film for DTF is the support where the printing is done with the special inks, to then apply the polyamide powder. Finally, it is placed in the drying oven to harden the adhesive powder, leaving the film ready to be printed on the garment using a heat press.
| Features | DTF Film A3+ 10 sheets SUB-F005 (hot peeling) |
|---|---|
| Finishing | Matte / Matte |
| Takeoff | Allows takeoff both cold and hot. It is not necessary to wait for it to cool down to take it off. |
| Treatment | 2 sided |
| Printable area | Printable on the matte side. If in doubt, to identify the printable side, place the sheet on a flat surface, slide your finger over the paper, pressing lightly. The side that has more texture and offers greater slip resistance is the printable one. |
| Recommendation | A second ironing of 3 seconds is recommended once the film has been removed for greater fixation and to improve the texture and softness of the print. |
- Brand
- Others
- Size
- A3 Plus (330 x 482 mm)
- Format
- Sheets
- Printing
- One face
- Type of paper
- Film
- Paper format
- A3+
- Peel
- Hot peel
220000002
New
- -50%
Last items in stock
Instructions
- 1.- Preheat the iron to 150ºC-180ºC.
- 2.- Place the film on the garment and apply medium pressure for 8-10 seconds
- 3.- Once ironed, remove the film
- 4.- Once the film has been removed, iron again for 3 seconds for greater fixation and to improve the texture and softness of the print.
Customers who bought this product also bought:
- -50%
- Pack
- -30%
Tap to zoom
