Metallic keychain with leather strap
Add these complementary products to your cart
The Metallic keychain with leather strap are customizable using the sublimation technique.
Elegant keyrings made of resistant metal and available in various shapes. It includes the metal ring for the keys and an imitation leather strap that gives it an elegant air.
- High quality and resistant material.
- Suitable for 1-sided printing.
- Material: Metallic and imitation leather strip
- Printable area: 1 side
- Color: Metallic and black strip.
- Keychain measures (without ring and strip)
- Round: 3.5 cm (diameter)
- Square: 3.5 x 3.5 cm
- Oval: 3.3 x 4.5 cm
- thickness: 0.2 cm
Sublimable part measurements:
- Round: 2.7cm in diameter
- Square: 2.7 x 2.7 cm
- Oval: 3.3 x 2.5 cm
- One face
- Marking techniques
The sublimation process can vary depending on the press used.
- 1.- Do the printing in mirror mode.
- 2.- It is advisable to let dry the paper for 5 minutes.
- 3.- Preheat the press to 180º.
- 5.- Place the paper correctly above the product and fix it with heat tape. Then, put it on the press.
- 6.- Close the press for 45 seconds and make pressure over the product.
- 7.- Once this time has passed, with the help of protective gloves, take out the product of the press and then remove the paper.
- 8.- Leave cool the product for a few minutes.
If after following our advice you can’t do the printing correctly, please contact with us using the contact form or the telephone: +34 93 486 90 25