Shopping Cart
There are no more items in your cart
Rectangular rock slate photo frame 19 x 14 cm para Sublimación
Rectangular rock slate photo frame 19 x 14 cm
€3.93 Price excludes VAT
€4.76 Price includes VATRectangular rock slate photo frame 19 x 14 cm. Made from natural slate stone, each frame is unique. Offers excellent customization quality with vivid colors and sharp images. Perfect for photo shops seeking exclusive, personalized products. Make every photo special!
- Irregular natural stone edges
- The printing is made directly over the front face of the product.
- Prepared for the personalization using the sublimation technique
- Includes two plastic supports for the stability of the photo-holder
- Includes and individual box
Product information
- Article: Blackboard photo frame
- Material: Slate
- Finish: Glossy
- Shape: rectangular
- Size: 19 x 14 cm
- Printing technique: sublimation
- Printing: the front
- Thickness: 0.8 cm
Marking techniques
- Sublimation
- UV
- UV-DTF
- Laser
The Rectangular rock slate photo frame 19 x 14 cm is the perfect product to create unique and personalized memories. With a slate surface, this photo frame allows you to transfer images, texts, or designs using the sublimation technique, ensuring vibrant and long-lasting colors. Ideal as a gift for special occasions such as weddings, birthdays, or to decorate your home with personalized photos. Made from high-quality materials, this sublimation-ready photo frame adds an elegant and modern touch to your most cherished memories. Make your photos extra special with this sublimation slate photo frame and create a unique design for any occasion!
- Colour
- Rock slate
- Finish
- Glossy
- Material
- Slate
- Marking techniques
- Laser
Sublimation
UV
UV-DTF - Photo frame size
- 19 x 14 cm
756
- Out-of-Stock
Out-of-Stock
How to sublimate Rectangular rock slate photo frame 19 x 14 cm?
Sublimation times and temperatures are for reference only and may vary depending on the press, paper, inks, or environment. It is recommended to run tests before production.
Method 1: photo frame with the white side facing UP
This method requires the use of a silicone sheet.
- Print your design in mirror mode.
- It is recommended to let the paper dry for about 5 minutes.
- Preheat the press to 200ºC.
- Place the printed paper correctly on the photo frame, then place them in the press with the white side facing up.
- Place a silicone sheet or heat-conductive product over the paper to ensure even heat distribution.
- Close the press and apply pressure on the photo frame for approximately 360 seconds.
- After the time has passed, using gloves, remove the photo frame from the press and peel off the sublimation paper.
- Allow the photo frame to cool down for a few minutes.
Method 2: photo frame with the white side facing DOWN
- Print your design in mirror mode.
- It is recommended to let the paper dry for about 5 minutes.
- Preheat the press to 200ºC.
- Place the printed paper correctly on the photo frame, then place them in the press with the white side facing down.
- Close the press and apply pressure on the photo frame for approximately 500 seconds.
- After the time has passed, using gloves, remove the photo frame from the press and peel off the sublimation paper.
- Allow the photo frame to cool down for a few minutes.
If after following our instructions you are still unable to achieve a proper print, please contact us via the contact form or by phone: 93 4869025
Issues with Lighter Areas After Sublimation
After sublimation, you may notice lighter areas on the surface of the slate photo frame. This is common due to the natural irregularities of the material. For better results, it is recommended to place a silicone sheet between the heat press and the paper. This helps the paper adapt to the small imperfections of the product. Additionally, performing a preliminary press with a full cycle and the silicone sheet ensures the surface reaches an optimal temperature for even sublimation.
Dull Colors or Lack of Definition
If the colors or sharpness of the image are not as vibrant as expected, it may be due to insufficient time or pressure. To correct this, we suggest increasing the pressing time by 30 to 60 seconds in the next cycle. Also, make sure to apply medium to high pressure during the sublimation process to achieve sharper and more vivid results.
Reviews
Geniales
Son preciosas, subliman muy bien y el servicio de entrega y post venta es muy bueno tambien.
Buenas proporciones
Me gustan las proporciones de este portafotos porque encuadran muy bien los diseños. También su calidad es muy buena.
- 1 out of 1 people found this review useful.
Resultado sorprendente
El resultado sublimado queda muy logrado. Es una superficie diferente y un regalo original para estas fechas. Mis clientes me lo piden mucho.
- 1 out of 1 people found this review useful.
Customers who bought this product also bought:
- Out-of-Stock
Out-of-Stock
- Pack
- Out-of-Stock
Out-of-Stock
Tap to zoom
