Polyester film for round badges

Polyester film for round badges (x100)

(5)
(0)
Quantity Unit discount You Save
5 €0.61 €3.05
Quantity 5 u.
Discount 15%
Diameters
  • Ø 31 mm
  • Ø 38 mm
  • Ø 50 mm
  • Ø 59 mm

Add these complementary products to your cart

The Polyester film for round badges (x100) is the transparent consumable that is placed over the design to protect it when mounting the round magnets or badges. High-quality pieces to achieve a professional finish. Along with the front side and the back side selected, and using these parts with any of the Button badge making machines B-700, B-500 or B-150, you can mount a custom magnet or badge in seconds.

Polyester sheets are slightly larger for each badge size, because the edge of the sheet will bend to hold onto the back of the badge or magnet.

Measure of the badge or magnetMeasure of the polyester
Ø 31 mm Ø 41.2-41.3 mm
Ø 38 mm Ø 50.8-50.9 mm
Ø 50 mm Ø 61.1-61.7 mm
Ø 59 mm Ø 69.7-69.8 mm

Also purchased separately:

  • Front side for round badges.
  • Back piece for round badges.

Check out all spare parts

 

Fridge magnets are perfect for personal applications or for advertising campaigns.

They can be used as souvenirs for events such as weddings, baptisms and communions, or as travel souvenirs, photos of children or couples. They are also widely used in marketing campaigns, because they are always visible in the customers' fridge, they represent a permanent reminder of the brand and allow contact information to be always at hand.

Due to the ease of printing the design and its quick assembly, they can also be used as souvenirs of tourist places, even with personalized photographs.

Badges with mounted needle are ideal for marketing campaigns, sporting or political events, or simply as a decorative element. Due to their low production cost, they are an effective and inexpensive element for all types of advertising.

Shape
Round
Badge size
Various
133030034-323-Ø 50 MM-
000P50-004P50
Front side for round badges Front side for round badges 2
Last items in stock
Back for round badges with mounted needle Back for round badges with mounted needle 2
Last items in stock

Machine Compatibility:

MachineCompatible sizesInterchangeable MoldsCutting toolBadgesMagnets
B-900s 78 x 53 mm Paper punch-cutter rectangular
B-700 Ø59 mm Mold Ø59 mm Paper cutter CM-500
Ø50 mm Mold Ø50 mm
Ø38 mm Mold Ø38 mm
Ø31 mm Mold Ø31 mm
Ø25 mm Mold Ø25 mm
B-500 Ø75 mm Paper cutter CM-500
Ø59 mm
Ø50 mm
Ø38 mm
Ø31 mm
Ø25 mm
B-150 Ø59 mm Paper cutter CM-500
Ø38 mm

Compatibility according to Printable Area:

Printable areaMachineCutting toolBadgesMagnets
Ø25 mm B-700 Paper cutter CM-500
B-500
Ø31 mm B-700 Paper cutter CM-500
B-500
Ø38 mm B-700 Paper cutter CM-500
B-500
B-150
Ø50 mm B-700 Paper cutter CM-500
B-500
Ø59 mm B-700 Paper cutter CM-500
B-500
B-150
Ø75mm B-500 Paper cutter CM-500
78 x 53 mm B-900s Paper punch-cutter rectangular

Create custom magnets and badges:

  1. Printing:
    • Select the design you want to print. It can be a logo, a text, an image or a photograph, or a combination of these.
    • It is recommended to use a design program to create templates according to the size of the badge or magnet. The template can include guide lines to facilitate cutting and assembly.
    • Remember to leave a paper edge, which will bend to hold onto the back of the badge or magnet.
    • Print the design on paper, using your usual printer.
  2. Cutting:
    • To cut the paper to the correct size and shape it is recommended to use a cutter or die cutter of the size that corresponds to the badge or magnet you want to create.
    • Place the paper in the chosen cutter so that the design is exactly centered in the cutter's viewing window.
    • Depending on the cutter used, cut the paper.
    • The paper is ready to mount on the badge or magnet.
  3. Assembly:
    • Place the front piece of the badge or magnet in the mold 1 of the machine. If you are using the B-150, you must first place the supplied metal washer in the lower mold.
    • Lay the paper with the design exposed on top of the front piece.
    • Cover the paper with a piece of polyester of the corresponding size.
    • Rotate the blue base until it stops, so that mold 1 is positioned underneath the upper mold. If using the B-150 machine, place the upper mold in position 1.
    • Pull the lever until it stops. The front of the badge or magnet is now ready and will remain in the upper mold.
    • Place in the lower mold 2, the selected back part according to the type of badge or magnet that you want to mount. In the case of the B-150 machine, you must first remove the meal washer from the lower mold.
    • The side with the needle, magnet, bottle opener, etc., will be facing down inside mold 2, and will not be visible at the moment.
    • Turn the blue base until mold 2 is underneath the upper mold. In the case of the B-150 machine, you will need to place the upper mold in position 2.
    • Pull the lever as far as it will go, then return it to the normal position.
    • Rotate the base again to remove the finished product.

Reviews

Write your review

Polyester film for round badges (x100)

The Polyester film for round badges (x100) is the transparent consumable that is placed over the design to protect it when mounting the round magnets or badges. High-quality pieces to achieve a professional finish. Along with the front side and the back side selected, and using these parts with any of the Button badge making machines B-700, B-500 or B-150, you can mount a custom magnet or badge in seconds.

Polyester sheets are slightly larger for each badge size, because the edge of the sheet will bend to hold onto the back of the badge or magnet.

Measure of the badge or magnetMeasure of the polyester
Ø 31 mm Ø 41.2-41.3 mm
Ø 38 mm Ø 50.8-50.9 mm
Ø 50 mm Ø 61.1-61.7 mm
Ø 59 mm Ø 69.7-69.8 mm

Also purchased separately:

  • Front side for round badges.
  • Back piece for round badges.

Check out all spare parts

Write your review

Customers who bought this product also bought:

Product added to wishlist
Product added to compare.