T-shirt Roly Shanghai Woman 6648 made by combining two polyester fabrics, ready to customize using the sublimation technique. Reinforced crew neck and short-sleeve raglan style. Comfortable and comfortable, it adapts naturally to the body.
Characteristics:
- Material: 100% polyester (140 g/m2)
- Main fabric: bird's eye
- Side fabric and under the sleeves: microperforated
- Type: short-sleeve raglan style
- Neck: round with reinforcing covered seams inside
- Removable label
- Colour: various colors
- Available in several sizes
Marking techniques
- Sublimation
- Serigraphy
- Textile Vinyl
- Lettering
- Transfer
- DTF
Product Measurements:
Sizes | S | M | L | XL |
---|---|---|---|---|
Width | 41,5 cm | 44,5 cm | 47,5 cm | 50,5 cm |
Height | 62 cm | 64 cm | 66 cm | 68 cm |
Recommendations for garment care:
- Cold wash (max 30ºC)
- Do not bleach
- Do not tumble dry
- Iron at low temperature and inside out (max 110ºC)
- Do not dry clean

A: Altura, Height, Haut
B: Anchura, Width, Largeur
- Finish
- Polyester touch
- Material
- Polyester
- Marking techniques
- DTF
Lettering
Serigraphy
Sublimation
Textile Vinyl
Transfer
Instructions
Temperature and time may vary depending on the press, paper and materials used. Adjust the values based on the result obtained.
- 1.- Do the printing in mirror mode.
- 2.- It is advisable to let dry the paper for 5 minutes.
- 3.- Preheat the press to 200ºC.
- 4.- Place the t-shirt in the press and put the paper above.
- 5.- Close the press for 60-70 seconds and make pressure on the t-shirt.
- 6.- Once this time has passed, with the help of gloves, take the shirt off the press and then remove the paper.
- 7.- Let the fabric cool for a few minutes.
If after following our advice you can’t do the printing correctly, please contact with us using the contact form or the telephone: +34 93 486 90 25